ASTM APPROVED
The MACV-2 Safety Boot was built to help you work in any environment. We’ve put our boots to the test and they officially meet ASTM F2412 / F2413 requirements for Impact (I), Compression (C), Electrical Hazard Resistance (EH), and Puncture Resistance (PR).
IMPACT RESISTANCE
Composite Toe demonstrated a minimum interior height clearance of 0.5 in during exposure to impact energy of 75 ft-lbf.
COMPRESSION RESISTANCE
Composite Toe demonstrated a minimum interior height clearance of 0.5 in when exposed to 2,500 lbf of compressive force.
ELECTRIC HAZARD RESISTANCE
The boot withstands the application of 18,000 volts at 60Hz for 1 minute.
PUNCTURE RESISTANCE
When viewed at a 90° angle, the puncture-resistant device shall pass if the tip of the test pin does not visually penetrate beyond the face of the material nearest the foot, after an applied force of 270 lbf.
COMPOSITE TOE
The Safety Boot’s composite toe is built to provide you with both, impact and compression protection. It gives you the same protection as a steel toe, but with the added benefits that it is lighter weight and won’t conduct electricity.
DYNEEMA PUNCTURE-RESISTANT SOLE
The Safety Boot’s sole is lined with Dyneema to make it puncture-resistant, aka nail-proof. Dyneema is insanely strong and will create a barrier between your foot and anything sharp on the ground you come into contact with. Feel confident and safe walking around any job site with every step.
ELECTRIC HAZARD RESISTANCE
You will not find any pieces of metal in our Safety Boot. That means they will not conduct heat, cold, or electricity in different environments. This is essential for all the electricians or welders that live on their feet.
HIGH-TRACTION FOREFOOT
The forefoot rubber is formulated for increased grip with a deep tread specifically shaped to grab the ground while shedding mud and debris. It wraps around the toes for additional protection against rocky terrain or when doing push-ups.
HARDENED MIDFOOT
The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance.
DENSE, DURABLE HEEL
The heel is denser and formulated for extreme durability with an expanded heel strike area that won't break down over time or distance.
PERFORATED EXTRA PADDED UPPER
We use premium upper materials that only get better over time. This upper is extra padded and perforated for breathability, all-day comfort, and will protect you against minor hits and scuffs.
WIDE TOE BOX
Generous forefoot area lets your toes breathe. Over time and distance during any activity including rucking or traveling, your feet will swell. This extra space reduces the friction that can occur if your feet rub against the insides of your boot.
13MM HEEL-TO-TOE DROP
The ideal heel-to-toe drop for walking around and working on your feet all day. A 13mm offset reduces the strain on your achilles (and by proxy your ankle, knees, and hips) and helps to accommodate a natural gait in an unnatural world of asphalt and man-made surfaces.
PREMIUM UPPER MATERIALS
Hard wearing full-grain Challenge Leather™ (Black) or suede (Coyote) that only gets better with time and use. Paired with 1000D CORDURA® and 2" nylon webbing for added ankle support - debris and rain stay out and your feet can still breathe.
SUEDE + INJECTION MOLDED HEEL COUNTER
Premium suede wraps a supportive, injection molded plastic heel counter. This combo stabilizes your heel as the suede leather prevents the kind of friction that causes hotspots and blisters.
ANKLE SUPPORT
The upper of the Safety Boot is built to maintain stability and support on uneven ground. Here's how this works. The 2" webbing is sewn into the heel counter. When you lace your boots up with your ankle locked into the heel, the heel counter and the 2" webbing do not pull forward - this is by design. But as you tighten them, this process locks your heel down and shifts the freedom of flex to the forefoot. Which is where it should be.